4-electrode sensors 546

El sensor de conductividad de cuatro electrodos 546 se puede utilizar con el mismo hardware y accesorios que los sensores de pH/ORP_cc781905-5cde-3194- bb3b-136bad5cf58d_546. Ideal for conductivity measurement in clean chemical applications, the 546 sensor provides high accuracy in a much smaller package than competitive toroidal sensor technology.

• 3/4 inch male NPT process connection
• Conductivity measurements up to 2 Siemens (depending on cell constant)
• Kynar body and PEEK insulation
• Autocompensation for corrosion and scale buildup (depends on analyzer)
• Insertion depths from 0.5 to 5 inches
• Electrode options in 316 stainless steel, titanium and Hastelloy

 

As the name suggests, four-electrode sensors add an additional pair of electrodes to the two-electrode sensor design. This second pair of electrodes provides sensor diagnostics that can then be used to compensate the measurement if scale or particles accumulate on the electrodes. Four-electrode conductivity sensors can resist coating and scale that could otherwise foul a traditional two-electrode sensor._cc781905-5cde -3194-bb3b-136bad5cf58d_Typical applications include the following:

• leak detection
• condensate return
• Salinity
• chemical concentration
• on-site cleaning

 

Four electrode sensor designs maintain a constant current through two of the electrodes and allow the drive voltage to change. If fouling occurs, the drive voltage can be increased to compensate for the measurement.